Rinnai I Series User Manual

Rinnai I-Series Condensing Boiler Combi Manual 19
Supplied by Installer:
• Level
• Four screws for mounng bracket
installaon
• Screws for top and boom bracket
installaon
Use appropriate screws for type of
wall construcon.
Hold the wall mounng bracket up
against the wall and use a level to
make sure the bracket is even. Proper
operaon requires the boiler to be
level.
Use four screws to secure the wall
mounng bracket to the wall (two
screws on far le side and two
screws on far right side).
Use the appropriate screws for the
wall construcon to secure the
mounng bracket to the wall
between two studs.
You Will Need:
• Rinnai Condensing Boiler
• Wall Mounng Bracket
Level
Wall Mounng Bracket
Insert the top bracket into the wall
mounng bracket. Make sure the wall
mounng bracket is aached to the wall
and can hold the weight of the boiler
before you fully let go.
Boiler
Right Side
Steps connued on next page.
Instrucons:

Rinnai I Series Specifications

General

Brand	Rinnai
Model	I Series
Category	Boiler
Language	English