Rion VA-11 User Manual

60
Measurement
Cursor Control
To move the cursor on the spectrum display and time waveform display during
measurement, and on the recall display, use the SETUP (ESC) key to turn the
reverse cursor off and then use the keys to move the cursor.
The frequency and level at the cursor are displayed as follows.
Cursor position level
3.24E-4 stands for 3.24 × 10
-4
Cursor position frequency
Numerals are in Hz. DC indicates direct current, and AP all-pass (overall)
value.

Rion VA-11 Specifications

General

Brand	Rion
Model	VA-11
Category	Measuring Instruments
Language	English