Mastering Your System
Page 13
LightSYS™2 Architecture
Your LightSYS™2 controls and monitors a variety of sensors, detectors, and contacts
placed throughout the premises, which provide external, perimeter and internal
burglary protection. The system is supervised, meaning that the panel checks the
status of each sensor to detect problems. If trouble is detected, you are notified both
with panel beeps and indicator lights as well as remote messaging.
The following diagram shows the components that make up the system:
User Operating Tools
LightSYS™2 can easily be managed locally or remotely depending on your system
configuration.
You can issue commands to the system and in turn, the system will communicate
information to you via its display, indicators, voice messages, SMS messages, Email
messages and by the sounds it makes.
Depending on your purchased supplementary modules, you can operate your system via
the following:
To Next Page
Loading...
