User Functions and Settings
Page 42
Complete List of User Functions
This section lists the complete menu of user functions.
The following table shows full Keypad Operations according to users.
√ : User is able to perform this function (GM=grand master or master, U=user, and
In.=installer)
– : User is unable to perform this function
Note:
Although these functions are in the User Functions menu, you can ask your installer to
program some of them for you
Menu Structure
GM
U
In.
Activities
Bypass √ √ -
Zones: Provides the ability to bypass any of the system's intrusion
zones as described on page 34.
One Time only— Single bypass for the next arming.
Bypass Reset— Removes any bypass(es) previously placed
on an intrusion zone(s).
Bypass Recall— Recalls the most recent zone bypass(es).
Permanent Bypass: Bypasses (and reset bypassing) any of
the system's intrusion zones permanently. This feature is
different from regular zone bypassing. While in regular
bypassing, the zone returns to be Not Bypassed after it is
armed, in permanent bypass the zone remains bypassed
until its status is changed.
Tamper bypass: Provides the ability to bypass bell or box tamper
conditions. If Bypass Tamper is selected and a
tamper condition occurs, the tamper LCD icon ( ) will
light, there will be no alarm, no indication to the
Monitoring Station and no record in the event log.
Note that this feature should be enabled by your installer.
Outputs √ √ -
Allows user control of previously designated external devices.
To Next Page
Loading...
