Risco lightsys 2 - System Tones

Mastering Your System
Page 17
S: Partition Stay Armed R: Partition Ready
LCD Blank Display
If defined by your installer, two minutes after the last keypad operation the keypad will be
disabled and the following display will appear on the LCD: Enter code:
To release the keypad and return to normal operation mode press: [CODE] + .
Note:
During blank display mode the Ready LED indicates a trouble in the system.
System Tones
In addition to the visual indications provided by your keypad(s), your system is designed
to produce audible annunciation after certain events. Depending on the circumstance, such
sounds may be made by your system's keypad(s) or sounders (for example, a siren or bell).
Note:
If defined by your installer, internal bell annunciation can be generated to
accompany any of the keypad sounds.
Event Keypad Sound Internal Bell External Siren
Intrusion Alarm Rapid beeping Rapid beeping Rapid beeping
Fire Alarm Rapid beeping Rapid beeping YES (staggered)
Keypad Police
Emergency
No sound (1) No sound (1) No Sound (1)
Keypad
Emergency /
Medical
A momentary chirp No sound No sound
Arming or
Disarming
No Sound System is armed:
1 chirp
System is disarmed:
2 chirps (Keyfob)
Disarm after alarm:
4 chirps (Keyfob)
System is armed:
1 chirp
Confirm
Operation
A one
-
second tone, if
completed correctly
No sound No sound