Risco lightsys 2 - Page 18

Mastering Your System
Page 18
Reject Operation
Three rapid error beeps,
if incorrect (2,3)
No sound No sound
Entry Delay
Countdown
Slowly repeating tones
until the entry delay time
period expires (2)
No sound No sound
Exit Delay
Countdown
Slowly repeating tones
until the exit delay time
period expires (2)
No sound No sound
Chime Sound
2 second buzzer beep (4)
No sound No sound
Notes:
1. Based on decisions made at the time your alarm system installation, keypads
may beep during this type of alarm.
2. Keypad beeps may be disabled at the user's discretion, see Buzzer On/Off,
page 41.
3. Press for two seconds to stop the fault beeps
4. Any intrusion zone, if selected for the chime feature, will, when violated
during the disarm period, cause the keypad to annunciate the event. The
chime can also be disabled when not required.