User Functions and Settings
Page 36
Warning:
A bypassed zone may reduce the system's security capability.
To view Not Ready zones:
Before performing the following procedure, identify the violated zone(s) as follows:
1. Enter your user code followed by
2. Scroll down with the key to view all "not ready" zones. The LCD only displays
"not ready" zones that belong to the user code that was entered.
To change a zone's bypass status:
1. Press and enter your code followed by .
2. Scroll to Activities and press .
3. Select Bypass and press .
4. Select Zones and press .
5. For bypassing a zone only for the next system arming select One Time Only. If you
want to bypass the zone permanently select Permanent Byp.
6. Scroll down the list of zones and using to select the zones to be bypassed.
7. To confirm press .
Notes:
•
You can access the one-time bypass option in a quick way by
pressing [Code][ ].
•
Zones defined for One Time Only bypass are automatically un-bypassed
when the system is armed and then subsequently disarmed.
•
The icon turns off when arming in away mode.
Scheduling Weekly Programs
The LightSYS™2 enables you to automate some system operations. Each program can be
defined with up to two time intervals per day, during which the system automatically
performs one of the following functions:
• Automatic Arming/Disarming: This program automatically arms and disarms
the system during your required time intervals.
• Automatic UO Activation: A UO (home appliance) activation program
automatically activates and deactivates UOs during your required intervals.
To Next Page
Loading...
