Mastering Your System
Page 15
Remote Phone Operation:
If your system includes the voice module, it can provide audible information about
system status, and enable any remote, touch-tone (DTMF) telephone
to act as a keypad for the system. Upon event occurrence, such as
alarm activation, the voice module informs you by calling you and
playing a
prerecorded event announcement, as described in the 5IN1545 LightSYS Voice
Module Programming and Operations Guide.
SMS:
If your system is equipped with RISCO Group's GSM/GPRS
module it can provide information about the system by SMS
and enable operation of the system using SMS commands for
arming the system, disarming the system and more.
Configuration Software:
RISCO Group's Configuration Software enables the installer to
program the system and manage the system locally or remotely.
System Monitoring
Report to Monitoring Station
When a system event occurs, the control system sends a message to your monitoring
service describing the exact nature of the event. This enables the monitoring service to
perform the required action. Monitoring service notification can be implemented through
either regular telephone cellular communication or IP network.
A sensor detects The control system is alerted An alarm is generated and
the monitoring service is notified
To Next Page
Loading...
