Page 50
Bell Trouble
Trouble has been detected in a bell
connected to the main panel or to the
power supply expander.
Contact your dealer.
Zone Trouble
A zone has been faulted during the
arm/disarm period.
Check the integrity of the
indicated zone.
Day Zone Trouble
A zone designated as a DAY ZONE has
been faulted during the disarm period.
Check the integrity of the
indicated zone.
Page 49
Appendix B – Glossary
[Terms and Definitions] Understanding the following terms will help you to better
manage and operate your system.
Authority Level: Each individual using the system is assigned a user code, which, in
turn, is linked to an authority level. Those with a "higher authority" have access to a
greater number of system functions, while those with a "lower authority" are more
restricted in what they may do. There are nine different authority levels available for
users of the LightSYS™2, as described on page 27. Chime: The chime is a series of
three short keypad tones, which can be set up to annunciate, during the disarmed
period, the violation of selected intrusion zone(s). For example, the chime tone can
be used to annunciate the arrival of a customer each time the front door opens. The
chime can be disabled or enabled at your discretion.
Configuration Software: Software used by the installer for programming the
LightSYS™2 and by the user for operating the system and viewing system
status.
Event Log: A list of system events can be displayed on an LCD keypad or uploaded
to the monitoring station via the configuration software and printed for further
analysis.
Exit/Entry Delay: Your security system must incorporate an entry/exit delay to allow
proper entry and exit to and from the premises without causing inadvertent
alarms.
To Next Page
Loading...
