User Functions and Settings
Page 37
• User Limitation: A user limitation program automatically prevents certain users
from disarming the system during specified time intervals.
Up to four scheduling programs can be defined. Use the table in Appendix C – Scheduling
Tables to define your date.
Automatic Arming/Disarming
1. Press and enter your code followed by .
2. Using the arrow keys, scroll to the option Clock and press .
3. Using the arrow keys, scroll to the Scheduler option and press .
4. Using the arrow keys, scroll to the Weekly option and press .
5. Select the Schedule program index number.
6. Select Arm / Disarm and press .
7. Follow the LCD display messages that will guide you through the programming
procedure. When defining Arm/Disarm program, you need to define the following
parameters: Partition, Time Schedule, Arming mode, and Label
Notes:
•
When defining the Day/Time intervals for each day of the week you can
select 8 All to set the same time intervals for every day in the week.
•
Use key to enter Y when requested. For example when
defining a partition that will be automatically armed and disarmed
•
Leave the time at 00:00 if you do not want to perform the automation
during the current interval for the current day
Automated Output Operation
A UO (home appliance) activation program automatically activates and deactivates UOs
during your required intervals. In each program, you can define four UOs to operate
simultaneously. When defining a UO activation program, you need to define the
following parameters: UOs, Time Schedule, Vacation, and Label
1. Repeat stages 1- 5 of the Arming/Disarming schedule programming procedure
2. Select UO On/Off and press .
3. Follow the LCD display messages that will guide you through the programming
procedure.
Note:
To Next Page
Loading...
