User Functions and Settings
Page 41
Change keyfob buttons that controls the outputs
By default, button 3 (small round key) of the keyfob controls output 1 and button 4 (egg
shape) controls output 2. This can be changed for all the keyfobs that are already assigned
to the wireless receiver.
1. Follow steps 1-3 of the previous procedure (See Assign New Keyfob)
2. Using the arrow keys, scroll to the UO Buttons option and press .
3. Use the key to toggle to Y and press . This will replace button 3 to button 1
and button 4 to button 2.
To Next Page
Loading...
