Risco lightsys 2 - 2-Way Remote Control Keyfob

Page 5
2-way Remote Control keyfob
Notes:
1. Consult your
installer for the operations defined with a code.
2. The proximity tag can be used instead of code.
Operation Quick High Security Mode
1
Full Arm
> [Code]
Partial
Arm*
> [Code]
Full
Disarm
[Code > ]
System
Status
for 2 seconds
for 2 seconds >
Code
Output Control A/B/C
for 2
seconds
for 2
seconds > [Code]
Panic Alarm simultaneously for 2 seconds
Clear Operation
*For Part setting with no entry delay, press and hold for two seconds