Rishabh RISH LM 1340 - Page 5

3.2.5.1.1.3.5 Quit Timer Output
3.2.5.1.1.4 Health Monitor Output
3.2.5.1.1.4.1 Health Monitor Configuration
3.2.5.1.1.5 Pre Paid Energy Output
3.2.5.1.1.5.1 Parameter Selection
3.2.5.1.1.5.2 Unit Cost
3.2.5.1.1.5.3 Topup Recharge
3.2.5.1.1.5.4 New Recharge
3.2.5.1.1.5.5 Quit Pre Paid Energy Output
3.2.6 Health Monitor Parameters Selection
3.2.6.1 Unbalance Voltage Limit
3.2.6.2 Unbalance Current Limit
3.2.6.3 Under Frequency Limit
3.2.6.4 Under Voltage Limit
3.2.6.5 Over Voltage Limit
3.2.6.6 Over Current Limit
3.2.6.7 Quit Health Monitor
3.2.7 Digital Input Parameter
3.2.7.1 De-Bounce Time
3.2.7.2 Digital Input 1 Mode Selection
3.2.7.3 Digital Input 1 Pulse Multiplier
3.2.7.4 Digital Input 2 Mode Selection
3.2.7.5 Digital Input 2 Pulse Multiplier
3.2.7.6 Quit Digital Input
3.2.8 Tariff Parameter
3.2.8.1 Number of Tariff Selection
3.2.8.2 Tariff Mode Selection
3.2.8.3 Tariff Energies Selection
3.2.8.4 Quit Tariff
3.2.9 Display Parameters
3.2.9.1 Feature Selection Menu
3.2.9.1.1 Backlit
3.2.9.1.2 User Assignable Screens
3.2.9.1.2.1 Screen Number Selection
3.2.9.1.2.2 User Screens Selection
3.2.9.1.2.3 Quit User Screens
3.2.9.1.3 Contrast
3