Riso 9630 - Stapler Jams (Face down Finisher)

2-23
2
ComColor GD Series Troubleshooting Guide
Stapler Jams (Face Down Finisher)
If a staple becomes jammed inside the machine, follow
the procedure below to remove the staple.
1
Open the staple cover.
2
Hold the handle of the staple
cartridge, and pull it toward you.
3
Open the staple cartridge cover, and
remove the jammed staple.
CAUTION
Be careful not to injure your fingers when removing the
staple.
4
Return the staple cartridge to its
original position.
5
Close the staple cover.