MASTER CLAMP & LOADING SECTION
REMOVAL
GR37705 - 7
2. DISASSEMBLING OF CLAMP UNIT
DISASSEMBLY
1)Remove the clamp spring.
2)Detaching the C-ring (× 1) fixing the clamp slide shaft, remove the motor unit.
3)Remove mounting screws (× 2) of Compensator Plate, remove the compensator plate, the metal, the collar
(short), Drive Gear II, and the collar (long).
4)Loosening the fixing set screw of the clamp cam, remove the cam.
5) Remove mounting screws (× 4) of the clamp motor remove the motor.
Clamp spring
Clamp slide shaft
Clamp motor
Drive gear
Metal
Compensator plate
Collar
Clamp cam
C-ring
Set screw
To Next Page
Loading...
