APPENDIX (I)
TEST MODE
GR3770 APX(I)-10
No. Details of Test Mode
137 Clamp plate closing operation (This applies only to 600dpi type.)
Clamp plate is closed when the 180° angular sensor is ON.
139 Sorter Initial Communication mode (This applies only to 600dpi type.)
Following connecting to the sorter, perform initial communication with the sorter to enable its use.
7. PANEL TEST
No. Details of Test Mode
200 Panel LCD test display (Factory use)
Panel message is displayed on LCD.
201 Panel LED test lighting (Factory use)
All LED’s on the panel are lit up.
202 Panel key check (Factory use)
Name of the pushed key on the panel is displayed on LCD.
To Next Page
Loading...
