RJM Music Technology, Inc.
www.rjmmusic.com
Mastermind PBC Wiring Diagram
Mastermind PBC Wiring Diagram
Wet/Dry/Wet system
This diagram shows a wet/dry/wet system, where there is a mono amplier
for the dry signal and a stereo power amplier for the wet signal. The wet
signal is taken from a line output on the amplier and has time-based
eects applied to it using loops 7-10
The red dashed lines indicate where you should use insert cables (TRS/stereo
on one side, individual left and right 1/4” mono plugs on the other).
OUTOUT
OUT