ROBOTIQ Hand-E C10 - General Presentation

1. General Presentation

The terms "Gripper", "Robotiq Gripper", "Hand-E C10 Gripper" and "Hand-E C10" used in this manual are used interchangeably
to designate the "Robotiq Hand-E C10 Gripper". The Robotiq Hand-E C10 Gripper is a robotic peripheral designed for industrial
applications. It is a unique robotic end-of-arm tool designed to quickly pick, place and handle parts in a broad range of sizes and
shapes.
The following key features must not be considered as appropriate operation. Safety guidelines must be read and understood
before any operation is attempted.

INFO
This manual uses the metric system. Unless otherwise specified, all dimensions are in millimeters.

Gripper nomenclature
INFO
Refer to the Scope of Delivery section and Spare Parts, Kits and Accessories section for details on standard
and optional parts.

The Hand-E C10 Gripper is a concentric gripper. Its 3 stepped fingers are actuated by a single motor. The basic gripper unit
includes stepped stainless steel fingers.
Fig. 1-1: Robotiq Hand-E C10 Gripper

Robotiq Hand-E C10 Gripper Instruction Manual
8