Roche Cobas 4800 System User Manual

cobas® 4800 System
7
Troubleshooting
Systern Manual
Hardware troubleshooting
To resolve barcode errors
for reagents
1 Do one of
the following:
1f the
reagents have not been loaded into the instrument, select
and
manually enter or scan the barcode with the barcode reader:
MmI B.d. Entry
l1n.t 8d
£tV
Barod
56406019700901
Barcode
Reqype
Barcode
Retype Barcode
56406019700901
- 0K
1
Figure 7-6
Manual Barcode Entry
1f the reagents have been loaded into the
instrument, choose the Unload
button and wait until the carrier is unloaded. Choose
and manually enter
or
scan the barcode with the barcode reader. To
bad the reagents back into
the instrument, choose the Reload button.
(
To
resolve barcode errors for samples
1 Do one of the following:
• Choose the Unload
carriers button and wait until the carrier is unloaded.
Choose the
Reload button. The carrier is unloaded and loaded again without
any further user
intervention. This time the carrier is loaded slower to
facilitate barcode
reading.
• Choose the Unload
carriers button. Under the Barcode ID field, manually
enter the barcode. Choose
the Reload button.
0
Instrument connection problems
1f the connection between the
software and the instrument is broken or if the instrument
was switched off the run status may not be
displayed correctly until the connection has
been re-established.
1f the connection between the
control unit and the instrument is interrupted (i.e. the
USB connector is disconnected),
the instrument will immediately abort the run. The
status of the instrument changes to
Error, however the status of the run in the
software will only be updated
after the connection is re-established. The same is true
for the display of the associated
error message in the alarm area. An error message
will only be issued after the
connection to the instrument is re-established.
After a connection error the
instrument has to be unloaded manually.
For
details, see Unloading the instrument deck nianually
(p.
140)
Roche Diagnostics
System Manual . Version 1.0
139

Roche Cobas 4800 System Specifications

General

Brand	Roche
Model	Cobas 4800 System
Category	Analytical Instruments
Language	English