Roche Cobas 4800 System - Colors; Tabs

4 Software
cobas® 4800 System
Basic software
elements Systenz Manual
Colors
The software uses the familiar traffic
light
color
scheme.
Color Meaning
S
Normal condition. The status is 0K.
Green
I
Warning condition. Status is not 0K, but immediate intervention is
Yellow
not required.
. Alarm condition. Immediate intervention is required. Operation
Red
may have stopped.
S
The item
is selected or active.
Blue
Table 4-1 Color concept
Tabs
Tabs are used to group information and software functions into units that can be
displayed on one screen. The second row of tabs represent subgroups of the tab
selected in the first row. The tab in the third row is a subtab of the tab selected in the
first row second row.
Navigating within the software needs only
one or two clicks.
L
Choose a main tab in the first
tab row. Here you have access to the five main work
areas Overview, Workpiace, Resuits,
Messages, and Utilities.
2.
Choose a subtab in
the second row. Here you have access to all tabs of the selected
work area.
The Workpiace tab is displayed only if a run is active.
A
1’TPi..’ Resuits
Messges Ul5ttes
B—
ste,,
C—
A Main
tabs.
Overview
is selected. The first row of tabs give access to the main work areas.
B
Subtabs. System is selected. The second row of tabs show all tabs of the selected work area.
C Subtab belonging to lnstruments tab. It is only visible t the Instruments tab is selected.
Figure 4-2
Main tabs and subtabs
Roche
Diagnostics
74 System Manual . Version 1.0