Roche Cobas 4800 System - Auto Matically Unloading Sample Carriers; Autoloader with Barcode Reader; Safety Guards

3
Hardware
cobas® 4800
System
Instrument
Systeni Manual
Safety guards
The autoload tray has safety guards attached on each side.
Extend the safety guards to
avoid bumping into the
carriers on the autoload tray.
Personal injury due to bumping into carriers on autoload
tray
Keep
safety guards on both sides of the autoload tray extended to
avoid bumping into
carriers on the autoload tray
Autoloader with barcode reader
During loading, the barcode reader on the
autoloader scans the barcode of the carrier
and those of the
supplies on the carrier (samples, reagents, and
disposables).
The following
barcode types are supported:
• Codabar (without
check sum)
• Code 39
(without check sum)
• Code 128, subset
B and
C
(with check sum)
• GTIN (inciuding
JAN) (with check sum). This barcode type is not
enabled
by
default. 1f you require this barcode type, contact
Roche Service.
• Interleaved 2 of 5 (without check sum). This
barcode type is not enabled by
default. 1f you require this barcode type, contact
Roche Service.
For details about
barcode specifications, see Barcode reader
(p.
63)
Auto matically unloading sample
carriers
Roche tiiagnostics
The
instrument can automatically unload sample
carriers i.e. samples, when pipetting
is
finished. This allows you to further process or
store the samples without having to
wait for
the run to finish. You can also define that the
sample carriers be left in the
instrument and
manually unloaded when the run is finished.
CAUTION
•
S --
è
--‘-
1
A
Satetyguard
Figure 3—6 Satety guards on each side of the
autoload tray
44
System Manual . Version 1.0