Need help?Do you have a question about the Roche Cobas 4800 System and is the answer not in the manual?
General| Automation Level | Fully automated |
|---|---|
| Software | Cobas 4800 Software |
| Operating Temperature | 15-30°C |
| System Type | Real-time PCR system |
| Intended Use | In vitro diagnostic use |
| Technology | Real-time PCR |
| Assay Menu | HPV, CT/NG, CMV, HIV-1, HCV |
| Assay Capabilities | Qualitative and quantitative assays |
| Sample Types | Plasma, serum, urine, swab samples |
| Throughput | Up to 96 tests per run |
| Time per run | Approximately 3.5 - 4 hours (depending on the assay) |
| Automation | Integrated sample preparation and amplification/detection |
| Connectivity | LIS connectivity |
| Barcode Reader | Integrated barcode reader |
| Power Requirements | 100-240 V, 50/60 Hz |
| Operating Humidity | 20-80% non-condensing |
Defines the system's purpose in diagnostics and screening.
Provides information on safe system operation.
Introduces the complete system and its features.
Describes the instrument's role in sample preparation.
Explains the analyzer's function in amplification and detection.
Details the software and control unit's functions.
Explains precautionary information presentation and symbols.
Details critical safety precautions for operator use.
Summarizes key warning and caution messages.
Details risks associated with electrical and laser components.
Precautions for handling biohazardous substances and waste.
Manages user accounts, passwords, and rules.
Covers changing and resetting user passwords.
Creating, changing, and deleting user accounts.
Steps to define new user accounts and their properties.
Defines rules for password complexity and usage.
Considers safety aspects before performing maintenance.
Routine tasks performed daily for instrument upkeep.
Tasks performed weekly for instrument upkeep.
Steps to replace the analyzer's Xenon lamp.
Steps for replacing primary, secondary, and Xenon lamp fuses.
Procedures for confirming and managing alarms.
Information on problem reports and remote access.
How to create, retrieve, and send problem reports.
Initiating and conducting remote support sessions.
Troubleshooting for instrument and analyzer hardware.
Resolving issues with reading barcodes.
Steps to take when the analyzer fails to function.
To Next Page
