Roche Cobas 4800 System User Manual

3
Hardware
cobas® 4800 System
Instrument
Roche Diagnostics
Systeni Manual
1f the instrument is installed on a special
trolley, a plastic waste chute is used in
place of
the solid waste bag and the tip waste is directed
into a waste box on the
trolley
that hoids a large solid waste bag. The large
solid waste bag holds tips of at
most
three full runs.
• The waste chute and waste box cannot
be reused and must be replaced when
they are
full.
• 1f required, replace the waste chute
in the same way as the small tip solid waste
bag.
• 1f required, fold up a new waste box
as indicated in Figure 3-12 Folding
up a
new waste
box
(p.
49)
For details about replacing the large solid waste
bag, see Daily maintenance
(p.
105) and
Weekly maintenance
(p.
110)
A Wastechute
B Large
solid
waste
bag with a capacity of at
most
three
full runs
Figure 3-11
Waste box with large solid waste bag
Waste box The waste chute and waste box cannot
be reused and must be replaced when
they are
full. Fold up a new waste box in the following
way:
C Waste box
D Trolley
48
System Manual . Version
1.0

Roche Cobas 4800 System Specifications

General

Brand	Roche
Model	Cobas 4800 System
Category	Analytical Instruments
Language	English