Roche cobas e 411 User Manual

cobas e 411 analyzer
Roche Diagnostics
16
of 61 Host Interface Manual for use in the US
•
Document Version 2.3
1907-05-0816
Communication text
The table below shows the communication text of the cobas e 411 analyzer.
Item Direction Elecsys type
Real time
Batch
cobas type
Real time
Batch
Inquiry for order
Upload
e 411 > HOST
Yes No Yes No
Order for test request
Download
HOST > e 411
Yes Yes Yes Yes
Result report
Upload
e 411 > HOST
Yes Yes Yes Yes
Inquiry of result
Download
HOST > e 411
No No No No
(yes: equipped, No: not equipped)
Table 4: List of communication text
Note
Patient sample and quality control sample are sent as result data, but not calibration result.
The cobas e 411 analyzer is not equipped with an auto-rerun function. Rerun sample can be
manually defined.
There is no Inquiry for order of a control sample.
Causes of Communication text are shown in the table below.
Text Real/Batch Cause
Inquiry for the requested tests
(upload)
Real
After sample ID is read, inquire of HOST for test selection
information of patient sample to which test selection information is
not registered.
Wait replay from HOST for test selection information for a certain
length of time after the inquiry. If not replied even after a certain
length of time, cancel the inquiry.
Order for test request
(download)
Real
Specify the test selection information for a sample when the test
selection information is inquired.
Batch
HOST specifies the test selection information of a patient sample at
a given timing. Register test selection information before reading
sample ID to use this function.
Result report (upload)
Real
Send result data of patient sample and quality control sample when
all test data of each sample is collected.
Batch
Send result data of patient sample and quality control sample
specified on DataReview window.
Table 5: Causes of communication text

Roche cobas e 411 Specifications

General

Brand	Roche
Model	cobas e 411
Category	Measuring Instruments
Language	English