Host Interface Manual for use in the US •
Document Version 2.3 3 of
Screenshots
Any screenshots in this publication are added exclusively for the purpose of
illustration. Configurable and variable data such as parameters, results, path
names etc. visible therein must not be used for laboratory purposes.
Copyright
©2007-2016, Roche Diagnostics GmbH. All right reserved.
The following trademarks are acknowledged.
COBAS, COBAS C, COBAS E and ELECSYS are trademarks of Roche.
All other product names and trademarks are property of their respective owners.
This document was created by Roche Diagnostics GmbH and the Roche
Diagnostics Engineering Operations department. Direct questions or concerns
regarding the contents of this document:
Roche Diagnostics Corporation
Engineering Operations Department
9115 Hague Road
P.O. Box 50457
Indianapolis, IN 46250-0457
USA
This document is available on the Roche Diagnostics USA website at
https://usdiagnostics.roche.com
.
Application Code Number (ACN)
Disclaimer for US Customers
Due to the increasing complexity of laboratories and the increase in types of
tests being run, it is critical to use unique host download codes for each test
when mapping codes on your Laboratory Information System (LIS). It is also
strongly recommended to use alpha or alphanumeric codes on your LIS. If
unique LIS test codes are not used when mapping on the LIS, this could cause
a test result from one test to be reported for a different test.
Required actions when using this host interface manual:
• Ensure that the LIS test codes mapped to your LIS are unique for each
test.
• Always identify the instrument source of the results on your LIS.
• Please disregard any application code numbers in this host interface
manual. Refer to the appropriate method sheet, package insert or
application code numbers document for the most current application
To Next Page
Loading...
Need help?
General
