Roche cobas e 411 - Message Header and Termination Records

cobas e 411 analyzer
Roche Diagnostics
32
of 61 Host Interface Manual for use in the US
•
Document Version 2.3
1907-05-0816
Message header record
Elecsys type format (upload, download)
H|\^&|||xxx|||||||P||[CR]
(1) (2) (3) (6)
cobas type format (upload, download)
H|\^&|||cobas-e411^1|||||host|RSUPL^BATCH|P|1[CR]
(1) (2) (3) (4) (5) (6)(7)
Pos No Field Type Max EV CV
Comments
Elecsys Type Format cobas Type Format
1 (1) Record Type ID ST 1 X R H is fixed.
2 (2) Delimiter Definition ST 4 X R Four characters, such as field separator character, repeat
separator character, component separator character, and escape
character are defined. The first character is a field separator
character and Record Type ID separator as well. These four
characters are "|\^&".
3 Message Control ID
4 Access Password
5 (3) Sender Name or ID CM 36 X X Indicates sender name.
(Can be omitted)
Delete it when sending from
cobas e 411 analyzer.
Setting is as follows.
(Can be omitted)
<Sender’s device
name>^<Communication
program version>
<Sender’s device name> Type:TX
Max: 30
Sending from cobas e 411
analyzer: cobas e 411 is fixed.
Sending from HOST: any
characters within alphanumeric
and "-".
<Communication program
version> Type: NM Max: 5 1 is
fixed.
6 Sender Street Address
7 Reserved Field
8
Sender Telephone
Number
9
Characteristics of
Sender
10 (4) Receiver ID ST 30 X Receiver’s name.
(Can be omitted)
Sending from cobas e 411
analyzer.: host is fixed.
Sending from HOST: any
characters within
alphanumeric and "-".