Roche cobas e 411 - Comment Record

cobas e 411 analyzer
Roche Diagnostics
Host Interface Manual for use in the US •
Document Version 2.3 45 of
61
1907-05-0816
Comment record
i
The comment record, that follows the order record for patient demographic data is not
used.
Result flag [C-RES] (Comment Record, that follows the Result Record)
Elecsys type (upload)
C|1|I|50^Below measuring range|I[CR]
(1)(2)(3) (4) (5)
cobas type (upload)
C|1|I|50|I[CR]
(1)(2)(3)(4)(5)
Pos No Field Type Max EV CV
Comments
Elecsys Type Format
cobas Type Format
1 (1) Record Type ID ST 1 X X C is fixed.
2 (2) Sequence Number NM 6 X X Indicates sequence No. Normally it is 1.
3 (3) Comment Source ST
1
X X
I is fixed.
4 (4) Comment Text NM/
CM
53/3 X X Data alarm No, and message
for the measured value is
attached.
<Alarm Flag>^<Alarm
Messages>
< Alarm Flag > Type: NM Max: 2
indicates alarm No.
<AlarmMessages>Type: ST Max:
50 indicates alarm message.
Data alarm No for the
measured value is attached.
(*1)
5 (5) Comment Type ST 1 X X I is fixed.
Table 19: Comment record
i
Skip this record when no data alarm for message value was produced.