Roche cobas e 411 - Page 44

cobas e 411 analyzer
Roche Diagnostics
44
of 61 Host Interface Manual for use in the US
•
Document Version 2.3
1907-05-0816
Pos No Field Type Max EV CV
Comments
Elecsys Type Format cobas Type Format
11 (9) Operator Identification ST 6 X Indicates operator ID who conducted measurement. HOST can't
set this field.
12 (10) Date/Time Test
Started
TS 14 Indicates time and date when
starting measurement. Setting
is as follows:
YYYYMMDDHHMMSS
13
(11)
Date/Time Test
Completed
TS
14
X
Indicates time and date when
completing measurement.
Setting is as follows:
YYYYMMDDHHMMSS
14 Instrument
Identification
X E1
Table 18: Test order record
Note
cobas type format transmits calculated tests. Elecsys type format does not transmit
calculated tests.
Elecsys type format has no Review by exception function.
cobas
type format does not transmit tests specified by exception alarm, defined in
the Review by exception screen.
Communication of batch results with review by exception alarm flags is based on
option with Review by Exception Results on Send to Host window shown
below.
• On: tests specified by Exception Alarm are communicated.
• Off: tests specified by Exception Alarm are not communicated.
Figure 11: Data selection
When Not Send Host is selected on the window Send to Host, only samples which
were not communicated to the host, are transmitted.