Roche cobas e 411 User Manual

cobas e 411 analyzer
Roche Diagnostics
Host Interface Manual for use in the US •
Document Version 2.3 25 of
61
1907-05-0816
Termination Phase
Both sender and receiver change their status into idle in Termination Phase. This
Phase only starts when the sender sends [EOT]. Response from the receiver to
this message is none. When [EOT] is detected at the receiver, it changes to idle
and the line is required to be changed to neutral.
Figure 10: Termination phase flow chart

Roche cobas e 411 Specifications

General

Brand	Roche
Model	cobas e 411
Category	Measuring Instruments
Language	English