13 (5) Request Information
Status Codes
ST 1 X X Indicates the objective of the record. Setting is as follows:
O: Order Query (to Host)
A: Cancel the last request (to Host)
(*1) The device does not transmit Termination Code when response or receiving message at download is normal.
(*2) When rack No. of rack version is unknown, @ is attached in front of <CarrierNo> followed by a delivered value.
(*3) Sample Type S1, S2, S5 must be changed to S0 in the next software version because there is no rack type/sample type differentiation on the analyzer. The correct
Sample Type is sent in the order record from the HOST.
(*4) MC indicates reduced volume not micro cup (like the cobas 6000 analyzer series).
Table 14: Request information record
To Next Page
Loading...
