Rockwell Automation Allen-Bradley PowerFlex 700 - Page 137

Index-5
K
Kf Speed Loop, 1-30
Ki Speed Loop, 1-29
Kp Speed Loop, 1-30
L
Language, 1-40
Last Stop Source, 1-43
LCD HIM
Menus
, B-4
LEDs, 2-2
Lifting/Torque Proving, C-2
Linear List, 1-3
Linking Parameters, B-6
Load Frm Usr Set, 1-2, 1-40
Load Limits Group, 1-31
Load Loss Alarm, 2-11
Load Loss Fault, 2-6
Load Loss Level, 1-38
Load Loss Time, 1-38
Local Mask, 1-52
Local Owner, 1-53
Logic Command Word, A-3
Logic Mask, 1-51
Logic Status Word, A-4
M
Man Ref Preload, 1-39
Manual Conventions, P-2
Marker Pulse, 1-21
Masks & Owners Group, 1-51
MaxFreq Conflict Alarm, 2-11
Maximum Freq, 1-16
Maximum Speed, 1-22
Maximum Voltage, 1-15
Menu Structure, HIM, B-4
Metering Group, 1-12
MicroPos Scale%, 1-61
Minimum Speed, 1-22, C-7
MOD LED, 2-2
Monitor File, 1-12
MOP Config Group, 1-39
MOP Frequency, 1-13
MOP Mask, 1-52
MOP Owner, 1-53
MOP Rate, 1-39
MOP Reference, 1-13
Motor Cntl Sel, 1-15
Motor Control File, 1-14
Motor Control Technology, C-8
Motor Data Group, 1-14
Motor Fdbk Type, 1-20
Motor NP FLA, 1-14
Motor NP Hertz, 1-14
Motor NP Power, 1-15
Motor NP RPM, 1-14
Motor NP Volts, 1-14
Motor OL Count, 1-44
Motor OL Factor, 1-15
Motor OL Hertz, 1-15
Motor Overload, C-10
Motor Overload Fault, 2-6
Motor Poles, 1-15
Motor Thermistor Alarm, 2-11
Motor Thermistor Fault, 2-6
Motor Type, 1-14
Motor Type Cflct Alarm, 2-11
Mtr NP Pwr Units, 1-15
Mtr Tor Cur Ref, 1-19
N
Neg Torque Limit, 1-19
NET LED, 2-2
Non-Resettable, 2-1
Notch Filter Freq, 1-20
Notch Filter K, 1-21
NP Hz Conflict Alarm, 2-11
NVS I/O Checksum Fault, 2-6
NVS I/O Failure Fault, 2-6
O
Operator Interface, B-5
Output Current, 1-12
Output Freq, 1-12
Output PhaseLoss Fault, 2-7
Output Power, 1-12
Output Powr Fctr, 1-12
Output Voltage, 1-12
Overspeed, C-11
Overspeed Limit, 1-22
OverSpeed Limit Fault, 2-7
OverVoltage Fault, 2-7
20B-UM001.book Page 5 Thursday, June 20, 2013 1:55 PM