Rockwell Automation Allen-Bradley PowerFlex 700S Programming Manual

158 Rockwell Automation Publication 20D-PM001D-EN-P - March 2019
Appendix A Human Interface Module Overview
Remove/Install the HIM
The HIM can be removed or installed while the drive is powered.
Steps: Key(s): Example Display:
To remove the HIM…
1. Press ALT and then Enter (Remove). The Remove HIM
configuration screen appears.
2. Press Enter to confirm that you want to remove the
HIM.
3. Remove the HIM from the drive or disconnect the
cable.
To install HIM…
• Insert the HIM into drive or re-connect cable.
ALT
+
Remove Op Intrfc:
Press Enter to
Disconnect Op Intfc?
(Port 2 Control)

Rockwell Automation Allen-Bradley PowerFlex 700S Specifications

General

Brand	Rockwell Automation
Model	Allen-Bradley PowerFlex 700S
Category	Controller
Language	English