QuickStick HT User Manual 19
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
Changes
Overview
This manual is changed as required to keep it accurate and up-to-date to provide the most
complete documentation possible for the QuickStick
®
High Thrust transport system. This sec-
tion provides a brief description of each significant change.
NOTE: Distribution of this manual and all addenda and attachments is not controlled. To
identify the current revision, contact ICT Customer Support.
Rev. A
Initial release.
Rev. B
Added the following:
•In Chapter 4, Specifications and Site Requirements, added information about repeated
cycling of the HVDC power to the QSMC motor controllers that causes undervoltage
faults.
Updated the following:
•In Chapter 8, Maintenance, updated all troubleshooting tables.
Rev. C
Added the following:
•In Chapter 2, Safety Guidelines, added Handling Magnet Arrays.
•In Chapter 3, Design Guidelines, added Motor Cogging, Electrical Wiring, and Mag-
net Array Use to the Transport System Design section.
•In Chapter 4, Specifications and Site Requirements, added exposed materials identifi-
cation to the Mechanical Specifications. Added motor grounding and the operating
To Next Page
Loading...
Need help?
General
