Maintenance
Preventive Maintenance
282 MagneMotion
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
Preventive Maintenance
The motors, drives, node controllers, and power supplies in the QuickStick HT transport sys-
tem are self-contained components that are designed for use in a clean, inert environment, and
require no maintenance other than that described here. Any deviation from this basic environ-
ment can affect the maintenance requirements, contact ICT Customer Support for additional
information. See Troubleshooting on page 286 if any problems are detected.
Table 8-1: QuickStick HT Transport System Preventive Maintenance Schedule
Component Maintenance Action Frequency
*
* The specified frequency is based on a certified clean, inert environment. The user must adjust their Preventa-
tive Maintenance Schedule to account for any deviations from this environment.
Page #
QSHT Transport System Cleaning 3 months or
as required
283
Wear Surface Maintenance 3 months or
as required
283
Cable Connection Inspection 3 months or
as required
284
Hardware Inspection 3 months or
as required
284
Cleaning Magnet Arrays 3 months or
as required
285
Node Controllers Transfer Log Files 3 months or
as required
284