Safety Guidelines
Recycling and Disposal Information
QuickStick HT User Manual 55
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
QSHT 5700 Inverters
The inverters contain the following materials and must be disposed of by following all facility,
local, and national procedures for the disposal of electronic equipment:
• Die cast Aluminum.
• Circuit board with connectors and semiconductors.
• Zinc-plated Low Carbon Steel Screws.
Magnet Arrays
The magnet arrays (attached to the vehicles) as the motor secondary contain Neodymium Iron
Boron (NdFeB) magnets and must be disposed of by following all facility, local, and national
procedures for the disposal of hazardous materials. Follow all safety procedures for the han-
dling of high strength magnets (see Magnetic Hazards). All strong permanent magnets must
be demagnetized before disposal. The magnet arrays contain the following materials:
• Neodymium Iron Boron (NdFeB) magnets.
• Stainless Steel.
• 316L/316L #2 Stainless Steel.
Packaging
The packaging for the QuickStick HT motors and components contains the following materi-
als. If the packaging is not being saved, it must be disposed of by following all facility, local,
and national procedures for the disposal of packaging material:
• Cardboard.
• Wood.
• Polyethylene Foam.
To Next Page
Loading...
Need help?
General
