Installation
Transport System Installation
QuickStick HT User Manual 213
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
Installing Vehicles
Vehicles can be added or removed as needed once the QuickStick HT transport system is
installed.
NOTE: The design of the guideway and of the vehicle determines the ease of adding vehi-
cles. That is, an open guideway allows vehicles to be placed onto it, while a closed
guideway requires either an opening for placement of vehicles or placement of the
vehicles before closing the guideway.
MAGNETIC FIELD HAZARD: Strong magnets in use.
To avoid severe injury, people with pacemakers and other
medical electronic implants must stay away from the magnet
arrays.
CRUSH HAZARD: Strong magnets in use.
To avoid severe injury from strong magnetic attractive
forces:
• Handle only one vehicle or magnet array at a time.
• Do not place any body parts (for example, fingers)
between a magnet array and any QuickStick HT motors,
ferrous material, or another magnet array.
• Magnet arrays or vehicles not being used must be secured
individually in isolated packaging.
NOTICE Strong magnets in use.
To avoid damage to watches, instruments, electronics, and
magnetic media, keep metal tools, metal objects, magnetic
media (for example, memory disks/chips, credit cards, and
tapes) and electronics away from the magnet arrays.
To Next Page
Loading...
Need help?
General
