Rohde & Schwarz FSW43 - AM Modulation Depth Configuration

Measurements
R&S
®
FSW
286User Manual 1173.9411.02 ─ 19
Remote command:
The AM modulation depth can also be queried using the remote command
CALCulate<n>:MARKer<m>:FUNCtion:MDEPth:RESult? on page 802.
5.12.3 AM Modulation Depth Configuration
AM Modulation Depth measurements are selected via the "AM Modulation Depth" but-
ton in the "Select Measurement" dialog box. The measurement is started immediately
with the default settings. It can be configured via the MEAS CONFIG key or in the "AM
Modulation Depth" dialog box, which is displayed as a tab in the "Analysis" dialog box
or when you select the "AM Mod Depth Config" softkey from the "AM Mod Depth"
menu.
The remote commands required to perform these tasks are described in chap-
ter 11.5.12, "Measuring the AM Modulation Depth", on page 801.
Marker 1/2/3................................................................................................................287
Search Signals............................................................................................................287
AM Modulation Depth Measurement