Rohde & Schwarz FSW43 - Center Frequency;Span; Center Frequency; Span

Common Measurement Settings
R&S
®
FSW
388User Manual 1173.9411.02 ─ 19
Center frequency.........................................................................................................388
Span............................................................................................................................388
Start / Stop.................................................................................................................. 389
Frequency Axis Scaling...............................................................................................389
Full Span.....................................................................................................................389
Zero Span................................................................................................................... 389
Last Span....................................................................................................................390
Center Frequency Stepsize.........................................................................................390
Frequency Offset.........................................................................................................390
Signal Tracking........................................................................................................... 391
└ Signal Tracking State....................................................................................391
└ Tracking Bandwidth...................................................................................... 391
└ Tracking Threshold....................................................................................... 391
└ Signal Track Trace........................................................................................391
Center frequency
Defines the normal center frequency of the signal. The allowed range of values for the
center frequency depends on the frequency span.
span > 0: span
min
/2 ≤ f
center
≤ f
max
– span
min
/2
zero span: 0 Hz ≤ f
center
≤ f
max
f
max
and span
min
are specified in the data sheet.
Remote command:
[SENSe:]FREQuency:CENTer on page 831
Span
Defines the frequency span. The center frequency is kept constant. The following
range is allowed:
Frequency and Span Configuration