Common Analysis and Display Functions
R&S
®
FSW
442User Manual 1173.9411.02 ─ 19
You can define search and sort criteria to influence the results of the analysis (see
"Marker Search Settings" on page 498).
Remote command:
LAY:ADD? '1',RIGH, PEAK, see LAYout:ADD[:WINDow]? on page 822
Results:
CALCulate<n>:MARKer<m>:X on page 932
CALCulate<n>:MARKer<m>:Y? on page 943
Result Summary
Result summaries provide the results of specific measurement functions in a table for
numerical evaluation. The contents of the result summary vary depending on the
selected measurement function. See the description of the individual measurement
functions for details.
Remote command:
LAY:ADD? '1',RIGH, RSUM, see LAYout:ADD[:WINDow]? on page 822
Spectrogram
A spectrogram shows how the spectral density of a signal varies over time. The x-axis
shows the frequency or sweep time, the y-axis shows the measurement time. A third
dimension, the power level, is indicated by different colors. Thus you can see how the
strength of the signal varies over time for different frequencies.
The spectrogram display consists of two diagrams: the standard spectrum result dis-
play (upper diagram) and the spectrogram result display (lower diagram).
For details see chapter 7.3.1.6, "Working with Spectrograms", on page 458.
Remote command:
LAY:ADD? '1',RIGH, SGR, see LAYout:ADD[:WINDow]? on page 822
7.1.2 Laying out the Result Display with the SmartGrid
Measurement results can be evaluated in many different ways, for example graphi-
cally, as summary tables, statistical evaluations etc. Each type of evaluation is dis-
played in a separate window in the channel tab. Up to 16 individual windows can be
displayed per measurement channel (i.e. per tab). To arrange the diagrams and tables
on the screen, the Rohde & Schwarz SmartGrid function helps you find the target posi-
tion simply and quickly.
Result Display Configuration
To Next Page
Loading...
