Getting Started
R&S
®
FSW
74User Manual 1173.9411.02 ─ 19
3.4.1 Understanding the Display Information
The following figure shows a measurement diagram in Spectrum mode. All different
information areas are labeled. They are explained in more detail in the following sec-
tions.
2 3
4
5
6
1
1 = Channel bar for firmware and measurement settings
2+3 = Window title bar with diagram-specific (trace) information
4 = Diagram area with marker information
5 = Diagram footer with diagram-specific information, depending on measurement application
6 = Instrument status bar with error messages, progress bar and date/time display
Hiding elements in the display
You can hide some of the elements in the display, for example the status bar or chan-
nel bar, in order to enlarge the display area for the measurement results ("Setup > Dis-
play > Displayed Items").
For details see the R&S FSW User Manual.
● Channel Bar............................................................................................................ 75
● Window Title Bar.....................................................................................................78
● Marker Information..................................................................................................79
● Frequency and Span Information in Diagram Footer..............................................80
● Instrument and Status Information..........................................................................80
● Error Information..................................................................................................... 81
Operating the Instrument
To Next Page
Loading...
