Getting Started
R&S
®
FSW
41User Manual 1173.9411.02 ─ 19
Risk of touchscreen damage during operation
The touchscreen may be damaged by inappropriate tools or excessive force.
Observe the following instructions when operating or cleaning the touchscreen:
●
Never touch the screen with ball point pens or other pointed objects with sharp
edges.
●
It is recommended that you operate the touchscreen by finger only.
As an alternative, you may use a stylus pen with a smooth soft tip.
●
Never apply excessive force to the screen. Touch it gently.
●
Never scratch the screen surface, for example with a finger nail.
Never rub it strongly, for example with a dust cloth.
2
1
3
4
6
8
9
7
5
Fig. 3-2: Touchscreen elements
1 = Toolbar with standard application functions, e.g. print, save/open file etc.
2 = Tabs for individual measurement channels
3 = Channel bar for firmware and measurement settings
4 = Input field for measurement setting
5 = Softkeys for function access
6 = Window title bar with diagram-specific (trace) information
7 = Measurement results area
8 = Diagram footer with diagram-specific information, depending on application
9 = Instrument status bar with error messages, progress bar and date/time display
A touchscreen is a screen that is touch-sensitive, i.e. it reacts in a specified way when
a particular element on the screen is tapped by a finger or a pointing device, for exam-
ple. Any user interface elements that can be clicked on by a mouse pointer can also be
Instrument Tour
To Next Page
Loading...
