Rohde & Schwarz FSW43 - Page 476

Common Analysis and Display Functions
R&S
®
FSW
476User Manual 1173.9411.02 ─ 19
1
2
3
4
5
6
7
8
Fig. 7-12: Color Mapping dialog box
1 = Color map: shows the current color distribution
2 = Preview pane: shows a preview of the spectrogram with any changes that you make to the color
scheme
3 = Color curve pane: graphical representation of all settings available to customize the color scheme
4/5 = Color range start and stop sliders: define the range of the color map or amplitudes for the spectrogram
6 = Color curve slider: adjusts the focus of the color curve
7 = Histogram: shows the distribution of measured values
8 = Scale of the horizontal axis (value range)
Start / Stop
Defines the lower and upper boundaries of the value range of the spectrogram.
Remote command:
DISPlay[:WINDow<n>]:SGRam|SPECtrogram:COLor:LOWer on page 918
DISPlay[:WINDow<n>]:SGRam|SPECtrogram:COLor:UPPer on page 918
Shape
Defines the shape and focus of the color curve for the spectrogram result display.
"-1 to <0"
More colors are distributed amoung the lower values
"0"
Colors are distributed linearly amoung the values
">0 to 1"
More colors are distributed amoung the higher values
Remote command:
DISPlay[:WINDow<n>]:SGRam|SPECtrogram:COLor:SHAPe on page 918
Hot/Cold/Radar/Grayscale
Sets the color scheme for the spectrogram.
Remote command:
DISPlay[:WINDow<n>]:SGRam|SPECtrogram:COLor[:STYLe] on page 918
Auto
Defines the color range automatically according to the existing measured values for
optimized display.
Trace Configuration