General Instrument Setup
R&S
®
FSW
599User Manual 1173.9411.02 ─ 19
Selecting the Object ← Modifying User-Defined Color Assignments
Selects the object for which the color is to be defined. Colors can be defined for the
following objects:
●
Background
●
Grid
●
Individual traces
●
Display lines
●
Limit lines and check results
●
Markers and marker information
Remote command:
Each object is assigned to a specific suffix of the CMAP commands, see chap-
ter 11.10.4.3, "CMAP Suffix Assignment", on page 1034.
Predefined Colors ← Modifying User-Defined Color Assignments
Displays the available colors from the predefined color set that can be used for the
selected object.
Remote command:
HCOPy:CMAP<item>:PDEFined on page 1007
Preview ← Modifying User-Defined Color Assignments
Indicates the currently selected color that will be used for the selected object.
Defining User-specific Colors
In addition to the colors in the predefined color set you can configure a user-specific
color to be used for the selected object.
When you select "Userdefined Colors", the set of predefined colors is replaced by a
color palette and color configuration settings.
Display Settings
To Next Page
Loading...
