Remote Commands
R&S
®
FSW
685User Manual 1173.9411.02 ─ 19
Usage: Query only
Table 11-1: Available measurement channel types and default channel names in Signal and Spectrum
Analyzer mode
Application <ChannelType> Parameter Default Channel Name*)
Spectrum SANALYZER Spectrum
I/Q Analyzer IQ IQ Analyzer
Pulse (R&S FSW-K6)
PULSE Pulse
Analog Demodulation
(R&S FSW-K7)
ADEM Analog Demod
GSM (R&S FSW-K10)
GSM GSM
Multi-Carrier Group Delay
(R&S FSW-K17)
MCGD MC Group Delay
Noise (R&S FSW-K30)
NOISE Noise
Phase Noise (R&S FSW-
K40)
PNOISE Phase Noise
Transient Analysis
(R&S FSW-K60)
TA Transient Analysis
VSA (R&S FSW-K70)
DDEM VSA
3GPP FDD BTS
(R&S FSW-K72)
BWCD 3G FDD BTS
3GPP FDD UE (R&S FSW-
K73)
MWCD 3G FDD UE
TD-SCDMA BTS
(R&S FSW-K76)
BTDS TD-SCDMA BTS
TD-SCDMA UE
(R&S FSW-K77)
MTDS TD-SCDMA UE
cdma2000 BTS
(R&S FSW-K82)
BC2K CDMA2000 BTS
cdma2000 MS (R&S FSW-
K83)
MC2K CDMA2000 MS
1xEV-DO BTS (R&S FSW-
K84)
BDO 1xEV-DO BTS
1xEV-DO MS (R&S FSW-
K85)
MDO 1xEV-DO MS
WLAN (R&S FSW-K91)
WLAN WLAN
LTE (R&S FSW-K10x)
LTE LTE
Realtime Spectrum
(R&S FSW-K160R)
RTIM Realtime Spectrum
Note: the default channel name is also listed in the table. If the specified name for a new channel already
exists, the default name, extended by a sequential number, is used for the new channel.
Selecting the Operating Mode and Application
To Next Page
Loading...
