Getting Started
R&S
®
FSW
72User Manual 1173.9411.02 ─ 19
Keep the default "File Type" setting "Instrument with all Channels" to store the con-
figuration of all channels.
Fig. 3-20: Saving the instrument settings to a file
4. Tap the "Save" button.
The file MyMultiViewSetup.dfl is stored in the default directory C:/R_S/
instr/user.
To load stored instrument settings
You can restore the settings to the instrument at any time using the settings file.
1. Press the PRESET button to restore the default instrument settings so you can
check that the stored user settings are actually restored afterwards.
2.
Tap the "Load" icon in the toolbar.
3. In the "Load" dialog box, select the MyMultiViewSetup.dfl file in the default
directory C:/R_S/instr/user.
4. Tap the "Load" button.
All instrument settings are restored and the display should resemble figure 3-19,
which shows the instrument display right before the settings were stored.
Trying Out the Instrument
To Next Page
Loading...
