Remote Commands
R&S
®
FSW
920User Manual 1173.9411.02 ─ 19
Example:
CALC:MATH:STAT ON
Turns trace mathematics on.
CALC:MATH:EXPR:DEF (TRACE1-TRACE3)
Subtracts trace 3 from trace 1.
Usage: SCPI confirmed
Manual operation: See "Trace Math Function" on page 469
CALCulate<n>:MATH:MODE <Mode>
This command selects the way the R&S FSW calculates trace mathematics.
Parameters:
<Mode> For more information on the way each mode works see Trace
Math Mode.
LINear
Linear calculation.
LOGarithmic
Logarithmic calculation.
POWer
Linear power calculation.
*RST: LOGarithmic
Example:
CALC:MATH:MODE LIN
Selects linear calculation.
Manual operation: See "Trace Math Mode" on page 470
CALCulate<n>:MATH:POSition <Position>
This command defines the position of the trace resulting from the mathematical opera-
tion.
Parameters:
<Position> Vertical position of the trace in % of the height of the diagram
area.
100 PCT corresponds to the upper diagram border.
Range: -100 to 200
*RST: 50
Default unit: PCT
Example:
CALC:MATH:POS 100
Moves the trace to the top of the diagram area.
Manual operation: See "Trace Math Position" on page 470
CALCulate<n>:MATH:STATe <State>
This command turns the trace mathematics on and off.
Analyzing Measurements (Basics)
To Next Page
Loading...
