Rohde & Schwarz NGMO1 - Removing of the Analog Board Y101, Y102; Analog Board Y101 (Channel A); Analog Board Y102 (Channel B)

Remo
v
al
and
Inst
a
ll
a
tion
of
A
s
s
e
m
b
l
i
es
P
o
w
er
S
upp
l
y
NG
M
O
9.1.2 Removing of the Analog Board Y101, Y102
9.1.2.1 Analog board Y101 (Channel A)
1. Pull off plug X501 (22) for fan A.
2. Unscrew the screws of analog board Y101 (Channel A)
(12 to 21).
3. Remove the board.
9.1.2.2 Analog board Y102 (Channel B)
1. Pull off plug X501 (11) for fan B.
2. Unscrew the screws of analog board Y102 (Channel B)
(1 to 10).
3. Remove the board.
3.00 / 05-2014 9-3