Rohde & Schwarz R&S TSME6 - Preparing for Use; 3 Getting Started; Placing the Product on a Bench Top; Setting up Indoors

Getting started
R&S
®
TSME6
12User Manual 4900.0033.02 ─ 08
3 Getting started
3.1 Preparing for use
Here, you can find basic information about setting up the product for the first time.
3.1.1 Unpacking and checking
1. Unpack the product carefully.
2. Retain the original packing material. Use it when transporting or shipping the prod-
uct later.
3. Using the delivery notes, check the equipment for completeness.
4. Check the equipment for damage.
If the delivery is incomplete or equipment is damaged, contact Rohde & Schwarz.
Accessory list
The R&S TSME6 comes with the following accessories:
●
Printed getting started manual
●
LAN cable
●
GPS antenna
●
12 V DC power supply cable (cigarette lighter cable)
●
4 connecting screws
3.1.2 Setting up indoors
3.1.2.1 Placing the product on a bench top
If you want to set up the R&S TSME6 on a benchtop or prepare the R&S TSME6 for
mobile use, proceed as follows.
To place the product on a bench top
1. Place the R&S TSME6 on a stable, flat and level surface.
2. If you want to stack R&S TSMx products, proceed as described in Chapter 5,
"Vibration-proofed stacking", on page 42.
3. If you want to stack the R&S TSME6 together with other products:
a) Follow the instructions given for the other products.
Preparing for use