Safety and regulatory information
R&S
®
TSME6
7User Manual 4900.0033.02 ─ 08
1 Safety and regulatory information
The product documentation helps you use the product safely and efficiently. Follow the
instructions provided here and in the following chapters.
Intended use
The R&S TSME6 is intended for efficient drive and walk tests with a maximum degree
of freedom and upgradeability. With the ultracompact design and multiband and multi-
technology support for simultaneous measurements, the scanner fulfills all require-
ments for a state-of-the-art measurement tool.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of potential dan-
gers and gives instructions on how to prevent personal injury or damage caused by
dangerous situations. Safety information is provided as follows:
●
In Chapter 1.1, "Safety instructions", on page 7. The same information is provi-
ded in many languages in printed format. The printed "Safety Instructions" for "DC-
Powered Products for Mobile Use" (document number 1171.2049.99) are delivered
with the product.
●
Throughout the documentation, safety instructions are provided when you need to
take care during setup or operation.
1.1 Safety instructions
Products from the Rohde & Schwarz group of companies are manufactured according
to the highest technical standards. To use the products safely, follow the instructions
provided here and in the product documentation. Keep the product documentation
nearby and offer it to other users.
Use the product only for its intended use and within its performance limits. Intended
use and limits are described in the product documentation such as the specifications
document, manuals and the printed "Safety Instructions" document. If you are unsure
about the appropriate use, contact Rohde & Schwarz customer support.
Using the product requires specialists or specially trained personnel. These users also
need sound knowledge of at least one of the languages in which the user interfaces
and the product documentation are available.
Reconfigure or adjust the product only as described in the product documentation or
the specifications document. Any other modifications can affect safety and are not per-
mitted.
Never open the casing of the product. Only service personnel authorized by
Rohde & Schwarz are allowed to repair the product. If any part of the product is dam-
aged or broken, stop using the product. Contact Rohde & Schwarz customer support at
https://www.rohde-schwarz.com/support.
Safety instructions
To Next Page
Loading...