Getting started
R&S
®
TSME6
26User Manual 4900.0033.02 ─ 08
3.1.6.2 LTE MIMO setup with two R&S TSME6s
Basic LTE MIMO measurements are possible with a single R&S TSME6, which can
analyze two different transmission paths of a signal from two different transmit anten-
nas. A single R&S TSME6 can determine the RSRP/Q and RS SINR results for both
paths (see documentation of the measurement software for details).
If two R&S TSME6s are connected to one host PC, multiple signals can be received by
two receive antennas and processed in one application. It is useful, for example, to
analyze a MIMO matrix, condition numbers, or ranks, or generally to optimize the LTE
MIMO setup.
Table 3-2: Required options for sample (minimum) configuration for LTE MIMO measurements with 2
R&S
TSME6s
R&S TSME6 Option
1 KxB, LTE (K29), LTE MIMO (K30)
2 None (MIMO extension option R&S TSME6-K300 installed by default)
Required connections
1. Connect the SYNC-cable (R&S TSME6-ZC2, order number 4900.1800.02) to the
Aux. connectors of all R&S TSME6 devices in this setup.
Figure 3-8: SYNC-cable connected to Aux. connectors of 2 R&S
TSME6 devices
2. Connect the power cable (R&S TSME-ZYC, order number 1514.7290.02) to the
DC IN connectors of all R&S TSME6 devices in this setup.
Preparing for use
To Next Page
Loading...